REFITTING THE SWINGARM

I have now refitted the swingarm after painting. I have to admit. The black swingarm totally changes the look of the bike. Should have came from factory like that.

Refitting the swing arm is an easy job. All that is required is to grease up the pivot ends and slide the swingarm back into position. When there slide a long screwdriver into the pivot bolt hole and you can leave it there while you find the nut and bolt. 

Once you have the bolt in place, slide the bolt in while removing the screwdriver and screw on the nut. Tighten everything g into 88Nm of torque and your done. One of the easy jobs on the bike. Wish the Himda was this simple.

Make sure you pull the chain through when putting the swingarm in place.